HSS countersink, DIN 334 C 60°

HSS conical and deburring countersink 60 ° dia. 16 mm shank dia. 10 mm DIN 334 C

KES HSS DIN 334 C60° 16,0

Item number:: 25202165
EAN:: 4007220168837

HSS conical and deburring countersink 60 ° dia. 16 mm shank dia. 10 mm DIN 334 C 1

HSS conical and deburring countersink 60 ° dia. 16 mm shank dia. 10 mm DIN 334 C 2

HSS conical and deburring countersink 60 ° dia. 16 mm shank dia. 10 mm DIN 334 C Youtube

Technical data Change variant

PFERD TOOLS worldwide

Technical information

HSS conical and deburring countersink 60 ° dia. 16 mm shank dia. 10 mm DIN 334 C

Angle: 60 °
Dia. shank: 10 mm
Diameter: 16 mm
Length, total: 63 mm
RPM, grey cast iron, white cast iron: 190 - 190 RPM
RPM, rust and acid-resistant steels: 190 - 290 RPM
RPM, soft non-ferrous metals: 290 - 380 RPM
RPM, steels up to 700 N/mm²: 290 - 380 RPM
RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP): 190 - 290 RPM
Version: HSS
Packaging unit: 1 piece

Description

Conical countersinks from PFERD TOOLS are characterized by their particularly sharp flutes that are able to achieve very good results, even at low cutting speeds.

High-performance countersink tools with a countersink angle of 60° for deburring all common materials such as steel, cast steel and non-ferrous metals.

Advantages

Very high stock removal rate and optimum chip removal.
Burr-free results even at low cutting speeds.
Long tool life.
High workpiece surface quality.

Recommendations for use

Use cutting oil or compressed air as a coolant/lubricant.
Particularly well suited for producing countersinks for 60° screws.

Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Chipboard; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hard non-ferrous metal; Hardwood; Other; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; White annealed cast iron (GTW, GJMW); Wood; Zinc

Applications: Countersinking; Deburring

Drive types: Automated centres; Column drill; Power drill; Tool machine

Downloads

brochure-drilling-and-countersink-tools-2022-web-en.pdf

HSS countersink, DIN 334 C 60°

HSS conical and deburring countersink 60 ° dia. 16 mm shank dia. 10 mm DIN 334 C

KES HSS DIN 334 C60° 16,0

PFERD TOOLS Newsletter subscription