Tungsten carbide burr conical counterbore KSJ 60 ° dia. 06x05 mm shank dia. 6 mm Z3 universal medium

Technical information

Angle: 60 °
Cut: 3
Dia. external: 6 mm
Dia. shank: 6 mm
Length, cut: 5 mm
Length, total: 50 mm
RPM from, grey cast iron, white cast iron: 24000 RPM
RPM from, hard non-ferrous metals: 13000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 13000 RPM
RPM from, rust and acid-resistant steels: 13000 RPM
RPM from, soft non-ferrous metals: 24000 RPM
RPM to, grey cast iron, white cast iron: 32000 RPM
RPM to, hard non-ferrous metals: 19000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 19000 RPM
RPM to, rust and acid-resistant steels: 19000 RPM
RPM to, soft non-ferrous metals: 32000 RPM
Packaging unit: 1 piece

Description

Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Conical counterbore burr according to DIN 8032 with cut conforming to DIN 8033, with point angle (60°). Suitable for flexible counterboring and chamfering.

Due to their special shapes, tungsten carbide burrs for flexible work on edges achieve almost precise chamfers or radii and can also be used flexibly in hard-to-reach areas. They are mainly used in steel and aluminium construction and have been specifically designed for chamfering, deburring and rounding of edges.

This design is double-ended, which means that it can cut and be used on both sides.

Advantages

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
High surface quality.

Recommendations for use

If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Soft non-ferrous metal; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Chamfering; Countersinking; Deburring; Milling; Milling out; Working on edges; Working on edges (chamfering, rounding)

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Tungsten carbide burrs for general use, cut 3, conical counterbore shape KSJ

Tungsten carbide burr conical counterbore KSJ 60 ° dia. 06x05 mm shank dia. 6 mm Z3 universal medium

Matching tool drive

PFERD Newsletter subscription