Wheel brushes crimped for power drills, universal, shank-mounted

Wheel brush crimped RBU dia. 100 mm shank dia. 6 mm steel wire dia. 0.30 power drills

Item number:: 43740167
EAN:: 4007220353660

Wheel brush crimped RBU dia. 100 mm shank dia. 6 mm steel wire dia. 0.30 power drills 2

Wheel brush crimped RBU dia. 100 mm shank dia. 6 mm steel wire dia. 0.30 power drills 3

Technical data Change variant

PFERDWORLDWIDE

Choose options

Dia. external

100 mm

Dia. filament material

0.3 mm 1.1 mm 1.27 mm

Filament material

Plastic filament, coarse (RED) Plastic filament, fine (BLUE) Steel wire (ST)

Mounting system

Shank

Packaging unit

Reset Filter

Technical information

Wheel brush crimped RBU dia. 100 mm shank dia. 6 mm steel wire dia. 0.30 power drills

Dia. external: 100 mm
Dia. filament material: 0.3 mm
Dia. shank: 6 mm
Filament material: Steel wire (ST)
Max. RPM: 4500 RPM
Mounting system: Shank
Packaging: POS packaging
Width: 12 mm
Packaging unit: 1 piece

Description

Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Specially developed for use with low rotational speeds on cordless drills and power drills.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Advantages

Highly flexible, enabling optimal adjustment to the workpiece contour.
Optimum presentation on the PFERDTOOL-CENTER using hanging hole and labelling with EAN number, designation and filament material.
Long tool life through use of PFERD special wire.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Flexible shaft drive; Power drill

Downloads

Wheel brushes crimped for power drills, universal, shank-mounted

Wheel brush crimped RBU dia. 100 mm shank dia. 6 mm steel wire dia. 0.30 power drills

PFERD Newsletter subscription